Descriptions: "The OLCT 10N is the ideal solution for safe areas or Zone 2 ATEX locations"
KEY FEATURES

• Digital transmitter without display
• ATEX Approved
• Detects combustible, toxic gases and O₂
• For use only with the MX43 controller

For commercial and light industrial applications
The OLCT 10N is a single channel digital detector designed for toxic gases, combustible gases and oxygen.
Simplified Installation Intended for use in coordination with Oldham's MX 43 panel, the OLCT 10N provides a rapid response. With the capability of up to 32 detectors on the same digital line or across 8 lines, the
OLCT 10N is application-driven, solution-oriented
Flexibility and Reduced Maintenance
Non-intrusive operator interface requires only a simple magnetic wand alicwing for one man calbration without opening the enclosure. Al calibration information, such as span reserve, is stored in the MX43
Compliance with Standards

• ATEX Zone 2
• IP65 and AM( II 3 GD

Technical Specification
  GENERAL

• Detection of combustible gases, toxic gases or oxygen
• Digital technology
• Non-intrusive calibration
• Cost savings on wiring installation

PHYSICAL

• Enclosure material: ABS, UV and shocks resistant
• Dimensions 118x110x60 mm
• Output: RS485 Modbus, proprietary protocol

POWER

• Cable inlet: 2 x M16 cable entries, outer diameter 4-8 mm
• Consumption @24Vdc:

- Electrochemical sensor: 2.5 mA - Catalytic sensor: 50 mA - CO₂ Infrared sensor:

APPROVAL

• II 3 GD - INERIS 11ATEX3023X - IECEx0029X
• Ex nA, nC IIC T4 Gc for explosimetric versions/ Ex nA, IIC T4 Gc for others
• Ex tc IIIC T135°C Dc
• -20°C<Ta< 55°C
• Electromagnetic compatibility according to EN50270

  GAS RANGES

• CH,, C3H8, C4H10, H₂, : 0-100 % LEL (-20°C to 55°C)
• O₂ : 0-30 % (-20°C to 50°C)
• CO : 0-300 ppm / 0-1000 ppm (-20°C to 50°C)
• H₂S : 0-30 ppm /0-100 ppm (-20°C to 50°C)
• NO : 0-100 ppm / 0-300 ppm (-20°C to 50°C)
• NO₂ : 0-10 ppm / 0-30 ppm (-20°C to 50'C)
• NH₃ : 0-100 ppm / 0-1000 ppm (-20°C to 40°C)

ITEM CODE : (16997)